Your present location:HOMEXDSL SeriesVDSL ADSL > CCPAM100M/S Point to Point vdsl1,POINT TO POINT 15M ,Distance 1.5KM
  • Products Name: CCPAM100M/S Point to Point vdsl1,POINT TO POINT 15M ,Distance 1.5KM

 

General Description

The CCPAM100 works as Ethernet to/from VDSL subscriber-site conversion bridge.

It uses QAM-based 4-Band VDSL technology. Which supports 5M/10M/15Mbps per

port symmetrical bandwidth over phone wiring with long driver capable up to

1.9/1.3/0.8Km (6333/4333/2666 feet).

The CCPAM100 also works with DHS3224V VDSL IP DSLAM, together

to form a cost-effective solution for services such as remote lecturing, telemedicine,

video conferencing, Video-on-Demand (VoD), IP-TV, Internet access, and various

high-speed data applications.

The front-panel provides LEDs indication of system and interface status. The builtin

POTS/ISDN splitter allows a standard POTS phone or ISDN device to be connected.

Full or half-duplex mode of LAN operations is automatically sensed and configured. VDSL

link rates are configured by local IP DSLAMs over a fix-speed and an auto-speed function.

Therefore, DHS3224V supports fix-speed, auto-speed, plug & play operations on the

subscriber-site, and are part of an ideal solution for delivering cost-effective,

high-performance broadband/multimedia services to Multi-Dwelling Units (MDU) and

Multi-Tenant Units (MTU) environments such as hotels, campus, hospitals and point to

point Application.

 

Key Features & Benefits

• Compliant with IEEE802.3 10BASE-T and IEEE802.3u 100BASE-TX standard

• Compliant with ETSI, ITU, ANSI standards

• Support auto speed and 15/10/5M fix mode selectable through DIP switch

• Max distance 5M/5M distance up to 1.9km(6333ft), 10M/10M distance up to 1.3km(4333ft),

Max speed 15M symmetrical and distances up to 800m(2666ft)

• Supports 1 * RJ-11 connector for Ethernet over VDSL

• Supports 1 * RJ-11 connector for telephone/PBX connection

• Supports 1 * RJ-45 port for 10/100Mbps Ethernet with Auto MDI/MDIX

Supports 4* DIP Switch for speed selectable(CCPAM100M only)

• Supports long packet size up to 1536 bytes

• Supports POTS/ISDN voice pass

• Supports 4wires phone set pass through

• Voice and Data work on the same telephone line

• Spectral compatibility with xDSL, ISDN (2B1Q/4B3T)

• Supports flow control IEEE802.3x for Full Duplex / Back Pressure for Half Duplex

• Supports Surge protection

• Provides Power LED and LED indication Link/Active Status for Ethernet

port and Link/Speed for VDSL port

• Plug & Play, mini size and metal case for outdoor application

• EMI certified by CE, FCC Class B, and VCCI Class B

• Safety compliant EN60950-1

 

Product Specifications

Standard:

IEEE802.3 standard

IEEE802.3u standard

Compliant with ETSI, ITU, ANSI standards

Interface:

1 * RJ-45 10/100Mbps Ethernet port

1 * RJ-11 connector for EoVDSL

1 * RJ-11 connector for telephone connection

Cable Connections:

RJ-45 (Ethernet): Category 3, 4, 5 UTP/STP

RJ-11 (EoVDSL): Twisted-Pair phone wire

LED indication:

Power

Link/Active Status for Ethernet port

Link/Speed for VDSL port

VDSL Frequency Spectrum:

CCPAM100 Transmitter: 4MHz ~ 7.9MHz

Receiver: 900 kHz ~ 3.9MHz

POTS/ISDN pass filter Spectrum:

0 ~ 630kHz

Typical Power Consumption:

2.75W

Operating Temperature:

-20°C~ 70°C (-4°F ~ 158°F)

Storage Temperature:

-20°C~ 70°C (-4°F ~ 158°F)

Humidity:

10 to 90% (non-condensing)

Dimensions:

30 x 119 x 162 mm

download attachments :

Tel:86-21-50208577
Email: xzh@combasst.com
Adress:110 Room , NO 389,   JinWan Road , PuDong District , ShangHai ,China
Copyright - 2014 All Rights Reserved. Combasst Co., Ltd, 沪ICP备14005048号 Powered by www.300.cn