CCPAM5000

CCPAM5000  EFM G.SHDSL.bis router takes advantage of the latest G.SHDSL.bis and EFM technology- Extended Rate Bonded SHDSL- unfolding unprecedented possibilities for symmetric transmission.

CCPAM5000’s multi-pair bonding, higher bit and packet transport allow carryingsymmetric data rates up to 5.69 Mbps, 11.38Mbps, or 22.76Mbps over 2-wire, 4-wire, or 8-wire of ordinary telephone lines respectively at the same reach range.

The application of CCPAM5000 is an ideal product for businesses and Internet Service Providers (ISP) to provide LAN extension and internet access; and its flexibility makes it ideal for applications such as web hosting, video conferencing and heavy two-way data traffic needed, particularly in the business environment. With an user-friendly management mechanism present,  CCPAM5000 can easily be configured via interfaces, such as TELNET, Web GUI, etc.

Specifications:
  Standard Compliance  Protocol 
  ITU-T G.991.2
 Transmission rate up to 5.69 Mbps on 2-wire
 Transmission rate up to 11.38 Mbps on 4-wire
 Transmission rate up to 22.76 Mbps on 8-wire
 Support of Annex A, Annex B, Annex F, and Annex G
 Auto load balancing with bonded pairs
Support point-to-point configuration
  
 Support ATM over G.SHDSL.bis and G.SHDSL
 MAC bridging(IEEE 802.3 and 802.1D)
PPPoE (RFC 2416)
 RFC 1483/2684 Bridged encapsulation (routing mode optional)
 IP support TCP, RIPv1, RIPv2, UDP, ICMP, ARP
IEEE802.1P Priority Output Queuing
IEEE 802.1Q VLAN
IEEE 802.3ah
IEEE802.3u Fast Ethernet 100BaseT
MAC Filtering
QoS support VBR-rt, VBR-nrt, CBR and UBR
 Support 8 PVCs
 NAT/PAT support
 DHCP client/server and DHCP relay functionality
VPN pass-through IPSec and L2TP
Support IGMP Snooping
 DMZ support
Support Port-based VLAN 
Maintenance 
  Firmware upgradeable via FTP or HTTP
Support Telnet
Support ATM OAM F5 End to End and Segment loopbacks
 Statistics on DSL link and data ports
Sys-log 
anagement  LED 
 
Password protection
  PAP and CHAP support
Remote access management via telnet
 SNMPv1, v2c
 Firewall Security
 Packet Filter
 Denial of Service
 Stateful Packet Inspection (SPI)
 Attack Alert and log
 Access Control
 Real time log
 MIB-II (RFC 1213, RFC 1573)
 Web based GUI interface
 Command Line Interface (CLI)
  
LED indicator; power, DSL links, Alarm, Ethernet ports and CO/CPE mode 
Hardware Interface 
 
DSL interface: 2/4 wires one RJ-11 jack. 8 wires two RJ-11 jack
Ethernet interface: four RJ-45 jack; 10/100BaseT auto sensing and crossover
AC power adapter (100VAC ~ 240VAC, 50-60Hz)
One craft Interface for local console access (CID) 
Dimensions & Weight 
 Dimensions: 35mm(H)×210mm(W)×193mm(D)
Weight: 914g 
Operating Requirements 
 Operating temperature: 0C to +50C
Operating humidity: 5% to 90% RH non-condensing