CCPAM2000 shdsl NTU
The CCPAM2000 SHDSL NTU interface DC input with LCD display, offers customers premises to high-speed TDM services with an interface(E1/V.35/ETH). The industry standard interface ( G.703 E1 / DB34 V35 / RJ45 ETH ) can be configured as an E1/V35/ETH connection. The interface connection transfers data up to 2.304Mbps.
The SHDSL NTU can be configured and managed via EOC, or menu-driven VT100 compatible Asynchronous Terminal Interface, either locally or remotely.
THE CCPAM2000 is equipped with an auto rate capability that identifies the maximum line rate supported by the copper loop. This powerful automatic configuration capability makes installation and service provisioning simple and painless. Further flexibility is provided in the ability to manually set the maximum NTU speed at different levels for different customer-tailored service offerings.
Features
Standard G.shdsl (ITU G.991.2) supports for improved reach/speed and greater interoperability
Fast and cost-effective provisioning of traditional frame relay (FR or T-HDLC) or TDM leased line services
User existing copper loop infrastructures
Can operate back to back connection
Efficient single wire pair usage
Up to 2.3Mbps symmetric service bit rate
Auto rate installation maximizes data rate based on loop conditions
Local management interface with LCD display
Remote line loopback
SHDSL Line performance monitoring
Raw and per time interval statistics
Specifications
Network Interface
Line Rate: SHDSL per ITU G.991.2
Coding: Trellis coded pulse amplitude modulation
Support: ANSI (Annex A) and ETSI (Annex B)
Payload rates: 192kbps to 2.304Mbps N x 64kbps (N=3 to 36)
Connection: RJ-45 jack (2-wire)
G.703 Interface
RJ-48C for balanced 120 Ω
BNC for unbalance 75 Ω
Bit Rate: 192 kbps to 2.048Mbps N x 64 kbps (N=3 to 32)
Framing
G.703/G.704
CRC 4 enable/disable
Unframed
Framed
V.35 Interface
Bit Rate: 192 kbps to 2.304Mbps N x 64 kbps (N=3 to 36)
Connection: DB-34 Female for V.35
LAN Interface
Bit Rate: 192 kbps to 2.304Mbps N x 64 kbps (N=3 to 36)
Connection: RJ-45 for Ethernet
DSL Timing
Network
Internal
DTE
Performance Monitoring
ES, SES, UAS, Alarms, Errors for SHDSL
Loopback Tests
Local Loopback
Digital Loopback
Remote Loopback
V.54 Loopback
Build-in 211-1 bit tester
Management
Configuration with keypad and LCD display
Console port
Support firmware upgradeable
Physical/Electrical
Dimensions: 20.8 x 4.5 x 21.1 cm
Input: 90~240VAC with 50~60Hz
Power Consumption:10W Max
Operation: 0 to 50°C
Humidity: Up to 95% (non-condensing)