Your present location:HOMECWDM/MSTP/SDH/PDH/FiberCWDM SFP FOM Series > Transfer 2 E1 and 1-2 Ethernet signal through fiber
  • Products Name: Transfer 2 E1 and 1-2 Ethernet signal through fiber

 

character:

 
(1) Realize monitor of remote equipment from local equipment, (having two row of LEDs, upper row indicate local status, lower row indicate remote status and alarm status.)
(2) Based on self –opyright IC.
(3) 1/2 Ethernet (10M/100M auto-adapt) optional, Ethernet rate 2.048M, support VLAN.
(4) Can connect with 4 E1 optical transmitter and receiver (FMO-120), realize Ethernet data transmit to upper lay.
(5) E1 port use digital clock resume circuit and digital phase-lock circuit.
(6) Jitter tolerance much better than GB.
(7) Provide function of E1 remote loop, order Ethernet remote loop, fiber local loop, and 1 interface of phone(optional).
(8)Network manager interface use SNMP or RS485.
(9)Two types:Standalone, desktop, 19inch;Card,usually be inserted in our rack 19 inch.
TECHNICAL SPECIFICATION:    
Fiber interface: FC/SC
electric interface: RJ-45(straight through,cross-over)
cable type: Cat 5 UTP, transmission distance 100m
fiber single-mode 8.3/125, 8.7/125, 9/125, 10/125um
multi-mode 50/125, 62.5/125, 100/140um
operating temperature: 0-50℃
storage temperature: -20-+70℃
humidity: 5%-95%(25℃ no condense)
power supply: 220V AC 165-265V AC , 50/60 Hz
-48V DC -36--72V DC
power consumption: 5W
 
 
Name: 2 E1+2 10M/100M series
product: FM0-2E1-2ETH
GENERAL INFORMATION Transfer 2 E1 and 1-2 Ethernet signal through fiber 
product character:  
(1) Realize monitor of remote equipment from local equipment, (having two row of LEDs, upper row indicate local status, lower row indicate remote status and alarm status.)
(2) Based on self –opyright IC.
(3) 1/2 Ethernet (10M/100M auto-adapt) optional, Ethernet rate 2.048M, support VLAN.
(4) Can connect with 4 E1 optical transmitter and receiver (FMO-120), realize Ethernet data transmit to upper lay.
(5) E1 port use digital clock resume circuit and digital phase-lock circuit.
(6) Jitter tolerance much better than GB.
(7) Provide function of E1 remote loop, order Ethernet remote loop, fiber local loop, and 1 interface of phone(optional).
(8)Network manager interface use SNMP or RS485.
(9)Two types:Standalone, desktop, 19inch;Card,usually be inserted in our rack 19 inch.
TECHNICAL SPECIFICATION:    
Fiber interface: FC/SC
electric interface: RJ-45(straight through,cross-over)
cable type: Cat 5 UTP, transmission distance 100m
fiber single-mode 8.3/125, 8.7/125, 9/125, 10/125um
multi-mode 50/125, 62.5/125, 100/140um
operating temperature: 0-50℃
storage temperature: -20-+70℃
humidity: 5%-95%(25℃ no condense)
power supply: 220V AC 165-265V AC , 50/60 Hz
-48V DC -36--72V DC
power consumption: 5W
dimension(mm): 180(L)*135(W)*32(H)

download attachments :

Tel:86-21-50208577
Email: xzh@combasst.com
Adress:110 Room , NO 389,   JinWan Road , PuDong District , ShangHai ,China
Copyright - 2014 All Rights Reserved. Combasst Co., Ltd, 沪ICP备14005048号 Powered by www.300.cn