Your present location:HOMEProtocol Convertor8*E1/1ETH > 8E1 TO ETH converter
  • Products Name: 8E1 TO ETH converter


Name: 8E1-10/100BASE-T Converter
product CCEB08
GENERAL INFORMATION This convertor provide conversion from 1 to 8 E1 channels to Ethernet interface. Support 1 to 8 E1 channels setting, it can detect the number of E1 chnanel and select available channel.  
(1)according with IEEE 802.3, support 10Base-T, 100Base-T.
(2)Support flexible setting of 1 to 4 E1 channels, auto detect the number of E1 channels and time-delay, select available E1 channels when reset.
(3)Provide 2 loop functions: local E1 loop, remote E1 loop.
(4)Ethernet transmission transparent,support AUTO-MDIX, straight and crossover auto-adapt.
(5)Can transmit super-long frame of IEEE 802.1Q, support Ethernet exchanger with VLAN function.
(6)Support E1 channel hot plug, and auto detect available E1 channels.
(7)Support reset remote system from local system.
(8)8 E1 can have 10 ms time-delay, CRC alarm limitation can auto insulate bad-quality transmit channel by configuration, and is single direction insulation. when one direction error rate over limitation, cut only this direction, the other direction not affected.( the two directions need not symmetry.)
(9)Power supply option: AC220V, DC-48V. The positive and negative terminal can be exchanged for DC-48V, easy for installation and maintenance.
(10)Network manager interface use SNMP
(11)Two types:Standalone, desktop, 19inch;Card,usually be inserted in our rack 19 inch.

download attachments :

Adress:110 Room , NO 389,   JinWan Road , PuDong District , ShangHai ,China
Copyright - 2014 All Rights Reserved. Combasst Co., Ltd, 沪ICP备14005048号 Powered by