Your present location:HOMEVideo converter Series1 VEDIO > 1 video Fiber converter
  • Products Name: 1 video Fiber converter

Name: signal line digital video-audio / date/Ethernet fiber optical mux
Type: CCDV1000 series
Function: signal line bidirectional digital video broadcasting, 1~2 line bidirectional high-fidelity audio, 1~4 line bidirectional asynchronous date,1 line 10/100M adapt Ethernet date to one fiber efficiently.

General information:
It is to transmit signal line bidirectional digital video broadcasting, 1~2 line bidirectional high-fidelity audio, 1~4 line bidirectional asynchronous date,1 line 10/100M adapt Ethernet date to one fiber efficiently. With complete digital and technology, DV 1000series support any high resolution dynamic or stationary picture high-fidelity transmit. It also can be anti-disturbance against several signals, environment, and work stably .It is widely used in security monitoring and control, high way, electronic police, automation, intelligent residential districts and so on.
It can work shortly after it is installed. You could select any date interface by set. It is connected easily and it can indicate power supply, link, video, also adjust video. There are two ways to install: desktop and rack.

◆ technical design, the whole surface by decoration.
◆ electrical circuit is designed by hardware scheme (except chip), and production is not effected by purchasing.
◆ Complete digital fiber transmit platform.
◆ No need to adjust when opened.
◆ Based on self copyright IC.
◆ No disturbance by analog in adjusting channel, picture and range.
◆ 4 steps filtering
◆ Complete digital, broadcast transmit efficiently
◆ High speed 10/100M Ethernet channel.
◆ Full speed asynchronous date channel
◆ Elastic configuration on the same platform.
◆ Power supply, link, video by dynamic indication.
◆ Self-adapt in PAL、NTSC、SECAM.
◆ ASIC design
◆ Farthest transmit distance:100KM
◆ Power supply:220v,-48v,+24, +12v,+5(optional)
◆ The two poles of Direct power supply can be exchanged.
◆ The interface is installed by SNMP.
◆ Three installations: wall method, rack in 19inches 1U, or plug in-card.
◆ Support OEM.
Applied field:  
◆ Intelligent transportation system;
◆ high speed way video monitoring and control system;
◆ toll monitoring and control system;
◆ close circuit TV industry monitoring and control;
◆ TV program switching channel transmit;
◆ high-fidelity video conference system;
◆ security monitoring and control system.

Technical parameter:  
Video interface 1 line
    ◇ input/output impedance: BNC 75Ω unbalance interface
    ◇ input/output voltage: peak 1 vpp,max 1.5 Vpp
    ◇ Signal: PAL/NTSC/SECAM
    ◇ Video bandwidth: 8MHZ
    ◇ Video number wide: 8/10/12 bit
    ◇ Differential gain: <1%
    ◇ Differential phase: <0.6°
    ◇ Slope: <0.5%
    ◇ luminance delay inequality: 10ns
    ◇ luminance gain gap: ±10%
    ◇ Weighted noise ratio :66db

Date interface (support 1~4 line asynchronous date RS-232/485/422)
    ◇ Physical interface: industry standard terminal lead
    ◇ Work way: full duplex/half duplex
    ◇ Interface type: RS-232/485/422,Manchester
    ◇ RS232 rate: 0-115.2Kbps
    ◇ RS-422/485 rate: 0-115.2Kbps
    ◇ RS-422/485 transmit distance: 0-1200m
    ◇ RS-422/485 agreement support RS-485/422 agreement
    ◇ Error rate: <10-9
    ◇ Fiber interface
    ◇ Physical interface: FC/PC、ST/PC
    ◇ Fiber type: single/multi module
    ◇ Transmit distance: multi module with 0-2km,single module with 0-25km,0-60km,0-100km

Audio interface(support 1~4 line optional and bidirectional audio)
    ◇ audio input/output: impedance 600Ω balance/unbalance interface,industry standard terminal lead.
    ◇ audio input/output level :2Vp-p
    ◇ frequency response :10HZ-20KHZ
    ◇ audio number width :24 bit
    ◇ Weighted noise ratio: 80db
    ◇ Total Harmonic Distortion :0.1%

Ethernet interface
    ◇ Physical interface: shielding RJ-45
    ◇ support IEEE 802.3/802.3u/802.1q VLAN
    ◇ work way : IEEE 802.3x full duplex and Back-Pressure half duplex flow control.

Work environment
    ◇ Work temperature: -30℃~+75℃
    ◇ storage temperature: -45℃~+85℃
    ◇ humidity : 0~95% without condensation
    ◇ input voltage :220V、-48V、+24V、+12V、+5V optional
    ◇ power ≤5W (single terminal)
    ◇ size : 482.6X 260X 25.4mm
Type interpretation: e,g type: CCDV12121DFDZST
◆DV: Means complete digital product series 
◆the first number (1): means channels of positive broadcast video signal 
◆the second number (2): means channels of positive high-fidelity audio;
◆the third number (1): means channels of asynchronous date ;
◆the forth number (2): means channels of switch
◆the fifth number (1): means channels of Ethernet;
◆the first alphabet : Z means positive video, F means passive video, D means bidirectional video
◆the second alphabet: Z means positive audio, F means passive audio, D means bidirectional audio 
◆the third alphabet: Z means positive asynchronous date,F means passive asynchronous date,D means bidirectional asynchronous date
◆The fourth alphabet : S means signal module 1310nm;U means signal module 1550nm;M means multi module 1300nm W means1310nm/1550nm(WDM)
◆The fifth alphabet: T means transmitter ;R means receiver

download attachments :

Adress:110 Room , NO 389,   JinWan Road , PuDong District , ShangHai ,China
Copyright - 2014 All Rights Reserved. Combasst Co., Ltd, 沪ICP备14005048号 Powered by